Ulterra Drilling Technologies, L.P. et al. vs Baker Hughes, a GE Company, LLC

Notice of Refund

Petitioner's Request for Refund IPR2018-01691

ORDER Granting Joint Motion to Terminate Proceeding Due to Settlement before Institution and Granting Joint Motion to Request that Settlement Agreement be Treated as Business Confidential Information 37 C.F.R. § 42.74

Notice of Accord Filing Date

Settlement Agreement

Joint Motion to Terminate

Order

Joint Motion to Seal Exhibit 2002

Patent Owner Mandatory Notice Information

Patent Owner Power of Attorney

Petition for Inter Partes Review of U.S. Patent No. 6,575,256

Petitioner Ulterra Drilling Technologies, L.P.'s Power of Attorney

Declaration of Geir Hareland

Geir Hareland Curriculum Vitae

U.S. Patent No. 6,575,256 (Doster)

U.K. Patent Application 2317632 (Mensa-Wilmot et al.)

Bork, K.R., The Rotary Rig and Its Components, Unit I, Lesson 1 (4th Ed.), Petroleum Extension Service and International Association of Drilling Contractors (1995).

Bourgoyne Jr., Andrew et al., Applied Drilling Engineering, Vol. 2, Society of Petroleum Engineers Textbook Series (1986).

Hareland, Geir, PETE 4313 ¿¿¿ Drilling Engineering and Well Completion, Course Program Handout No. 1, Oklahoma State University (Spring 2017).

Van Dyke, Kate, The Bit, Unit 1, Lesson 2 (4th Ed.), Petroleum Extension Service and International Association of Drilling Contractors (1995).

Hareland, Geir, PETE 4313 ¿¿¿ Drilling Bits - Drag Bits, Course Program Handout No. 4, Oklahoma State University (Spring 2017).

Kerr, Callin Joe, PDC Drill Bit Design and Field Application Evolution, Journal of Petroleum Technology (1988).

File History of U.S. Patent No. 6,575,256 (Doster)

U.S. Patent No. 5,651,421 (Newton et al.)

U.S. Patent No. 5,178,222 (Jones et al.)

Hareland, Geir, PETE 4313 ¿¿¿ Rolling Cutter Bits, Course Program Handout No. 5, Oklahoma State University (Spring 2017).

Besson, Alain et al., On the Cutting Edge, Oilfield Review (2000).

Lewis, J.P. et al., Lateral-Jet Hydraulics and Oval-Cutter Technology Combine to Improve PDC Performance, North Sea Scott Field, Society of Petroleum Engineers Drilling and Completion, SPE 29400 (June 1997).

Taylor, S. et al, Unique PDC Bit Technologies Combine to Consistently Reduce Drilling Time in Interbedded Formations, International Association of Drilling Contractors and Society of Petroleum Engineers, IADC/SPE 47778 (Sept. 1998).

Warren, T.M. and Sinor, L.A., PDC Bits: What¿¿¿s Needed to Meet Tomorrow¿¿¿s Challenge, Society of Petroleum Engineers, SPE 27978 (1994).

U.S. Patent No. 5,443,565 (Strange, Jr.)

Glowka, D.A. and Stone, C.M., Thermal Response of Polycrystalline Diamond Compact Cutters Under Simulated Downhole Conditions, Society of Petroleum Engineers, SPE 11947 (April 1985).

Atashnezhad, A., Ph.D. Proposal Drilling Optimization Using New PDC ROP Model and Differential Evaluation Algorithms, Oklahoma State University (April 2018).

Turner, Evan, Bit improvements are cutting drilling costs, World Oil, Vol. 217, No. 4, pgs. 59¿¿¿66 (April 1996).

U.S. Patent No. 6,089,336 (Nexton et al.)

Lyng Drilling, product specifications of the LD 565RSA, the LD 575RS, and the LD 575RSX (Aug. 2003).

Rabia, Hussain, Well Engineering & Construction (2001).

Robertson, Neil et al., New PDC Designs Doubles ROP on Kingfisher Project Well, Central North Sea, American Associated of Drilling Engineers, 01-NC-HO-15 (2001).

PDC bit profile, PetroWiki, Society of Petroleum Engineers, (accessed Aug. 15, 2018).

Zijsling, D.H. and Illerhaus, Roland, Eggbeater PDC Drillbit Design Eliminates Balling in Water-Based Drilling Fluids, SPE Drilling & Completion, Society of Petroleum Engineers, SPE-21933-PA (Aug. 1993).

Macini, Paolo, Drill Bits for Horizontal Wells, Chemical, Mining and Environmental Engineering Department, University of Bologna (1996).

Clegg, J.M., An Analysis of the Field Performance of Antiwhirl PDC Bits, International Association of Drilling Contractors and Society of Petroleum Engineers, IADC/SPE 23868 (1992).

Sinor, L.A. and Warren, T.M., Application of Anti-Whirl PDC Bits Gains Momentum, Society of Petroleum Engineers, SPE 25644 (April 1993).

Pain, D.D. and Schieck, B.E., Evolution of Polycrystalline Diamond Compact Bit Designs for Rocky Mountain Drilling, Society of Petroleum Engineers, SPE 12906 (July 1985).

Sinor, L.A. et al., The Effect of PDC Cutter Density, Back Rake, Size, and Speed on Performance, International Association of Drilling Contractors and Society of Petroleum Engineers, IADC/SPE 39306 (March 1998).

U.S. Patent No. 4,453,605 (Short, Jr.)

Mensa-Wilmot, G. et al., Innovative Design Processes and Technologies Improve PDC Bit Performance in Harsh Drilling Environments, Society of Petroleum Engineers, IADC/SPE 103983, (Nov. 2006).

Niznik, M.R. et al., A New Approach to Stick-Slip Management Integrating Bit Design and Rotary-Steerable-System Characteristics, International Association of Drilling Contractors and Society of Petroleum Engineers, IADC/SPE 98962 (Feb. 2006).

Taylor, M.R. et al., High Penetration Rates and Extended Bit Life Through Revolutionary Hydraulic and Mechanical Design in PDC Drill Bit Development, Society of Petroleum Engineers, SPE 36435 (Oct. 1996).

U.S. Patent No. 5,967,246 (Caraway et al.)

U.S. Patent No. 6,408,958 (Isbell et al.)

Hareland, Geir, PETE 5313 ¿¿¿ Drilling Simulation, Course Program Handout Nos. 5 and 6, Oklahoma State University (Fall 2016).

Hughes Christensen, product specifications of the HC607 drill bit (2005).

Roberts, T.S. and Schen, A.E., Optimization of PDC Drill Bit Performance Utilizing High-Speed, Real-Time Downhole Data Acquired Under a Cooperative Research and Development Agreement

Mensa-Wilmot, Graham and Penrose, Bill, Advanced Cutting Structure Improves PDC Bit Performance in Hard and Abrasive Drilling Environments, Society of Petroleum Engineers, SPE 81167 (April 2003).

Cerknovik, Jerry, Design, Application, and Future of Polycrystalline Diamond Compact Cutters in the Rocky Mountains, Society of Petroleum Engineers of AIME, SPE 10893 (May 1982).

Glowka, D.A. and Stone, C.M., Effects of Thermal and Mechanical Loading on PODC Bit Life, SPE Drilling Engineering, Society of Petroleum Engineers (June 1986).

Andrews, R. et al., Methods of Using Logs to Quantify Drillability, Society of Petroleum Engineers, SPE 106571 (April 2007)

Hareland, Geir, Drilling Optimization Simulation Reduces Drilling Cost, Society of Petroleum Engineers¿¿¿ Distinguished Lecturer Program (March 2011).

U.S. Patent No. 6,123,161 (Taylor)

U.S. Patent No. 5,531,281 (Murdock)

Baker Hughes¿¿¿ Disclosure of Asserted Claims and Preliminary Infringement Contentions (July 13, 2018).

U.S. Patent No. 4,538,690 (Short, Jr.)

Hareland, Geir et al., Cutting Efficiency of a Single PDC Cutter on Hard Rock, Petroleum Society, Paper 2007-082 (June 2007).

U.S. Patent No. 5,314,033 (Tibbitts)

Hughes Christensen, product specifications of the CW210655 drill bit (Sept. 1996).

Huang, Hsin I. et al., The Positive Effects of Side Rake in Oilfield Bits Using Polycrystalline Diamond Compact Cutters, Society of Petroleum Engineers of AIME, SPE 10152 (Oct. 1981).

Warren, T.M. and Sinor, A., Drag-Bit Performance Modeling, Society of Petroleum Engineers, SPE-15618-MS (Oct. 1986).

Warren, T.M. and Sinor, A., Drag-Bit Performance Modeling, SPE Drilling Engineering, Society of Petroleum Engineers, SPE-15618-PA (June 1989).

Canadian Patent Application No. 2,009,654 (Hareland et al.)

Soares, Cesar et al., Evaluation of PDC bit ROP models and the effect of rock strength on model coefficients, Journal of Natural Gas Science and Engineering 34 (Aug. 2016).

Bratli, R.K. et al., Drilling Optimization Software Verified in the North Sea, Society of Petroleum Engineers, SPE 39007 (1997).

Hareland, Geir, PETE 5313 ¿¿¿ Advanced Drilling, Course Program Handout Nos. 7 and 8, Oklahoma State University (Fall 2016).

Gjelstad, G. et al., The Method of Reducing Drilling Costs More than 50 Percent, Society of Petroleum Engineers, SPE/ISRM 47342 (1996).

U.S. Patent No. 7,798,256 (Hoffmaster et al.)

Spaar, J.R. et al., Formation Compressive Strength Estimates for Predicting Drillability and PDC Bit Selection, International Association of Drilling Contractors and Society of Petroleum Engineers, SPE/IADC 29397 (March 1995).